Aimants de voiture 30mil

Bleed & Trim
1/8" on all sides of the document will be trimmed off, this is called the bleed. So the size of the file that you submit needs to be 1/4" higher and wider than the finished (cut) size. Make sure that all background images and colours extend into this area to avoid having a white frame around your design.

Safety Zone
Please adjust your text and important graphics to be 1/8" inside of the finished size on all four sides.

Colours
The file needs to be in CYMK colour not RGB

Resolution
The resolution of your file needs to be 300dpi

Submitting Files
We prefer a pdf file (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size. Make sure all fonts are converted to outline and all graphics are embedded and NOT linked.

Blacks
LARGE AREAS OF BLACK:
Rich black ( 40% Cyan, 40% Magenta, 30% Yellow, 100% Black ) should be used for large areas of black and will give a deep solid black finish.
SMALL BLACK TEXT:
100% black ( 0% Cyan, 0% Magenta, 0% Yellow, 100% Black ) should be used for small black text (12pt and smaller) and lines, this will result in crisp text and edges.

For a Blue that does not come out Purple
To get a proper blue that does not print purple the Magenta has to be less than or equal to the (Cyan value - 30) The reverse is true if you want to print purple

Engagez l'un de nos graphistes professionnels pour concrétiser votre vision.
Nos honoraires de conception sont basés sur le temps passé. Notre tarif pour la conception graphique est de 75 $ l'heure. Les images en stock et les textes ne sont pas inclus.

Prior to Application
Clean the car magnet and the metal surface with mild detergent. Allow to dry. Please note that smooth and flat metal surfaces maximize magnetic grip. Do not apply to car roofs or other horizontal surfaces subject to direct sunlight and high heat.

Application Instructions
Apply one edge of the magnet to the metal surface first, allowing for more control over positioning. Ensure the entire magnet is affixed to the metal surface without air pockets.

To reposition the magnet, remove the magnet by peeling from the sides. Then, reapply. Do not drag or slide the magnet, as it may stretch.

Maintenance
Clean the magnet and the metal surface regularly with a mild detergent. Remove the magnet before a car wash.

Cold weather can cause magnets to become stiff. Apply or remove the magnet in a parking garage or other sheltered location.

Storage
When the magnet is not in use, store flat in a clean, dry place. Avoid creasing or bending. Do not stack magnets with the magnetic sides facing each other.